I had to do a reinstall of my 2013 MacBook Pro and the stock installer would give me the old one which I would then need to upgrade to El Capitan. In computer world I prefer clean installs over upgrades as it always leaves residue from the older OS so I did it with USB drive and wrote it down below.

My USB drive was from a Linux install and OSX could not make heads or tails from it with GUI tools. But luckily OSX has command line tool diskutil that can.

  • Get a USB drive minimum of 8G size. It does not matter if OSX detects it or not. Hard reboot your computer and insert it.
  • Download El Capitan from Apple Store.
  • Open up a terminal and issue below commands in this terminal session.
  • If you need to back up your stuff do it now as it will all be lost soon :)

This is simplest done with diskutil. Let's first look at what drive the USB is.

diskutil list

Then reformat the entire disk for install use this command, replacing diskN with the disk you see above as your USB drive:

diskutil eraseDisk JHFS+ ElCapInstall diskN

Once El Capitan has downloaded from Apple store make an install media with below command:

cd /Applications/Install\ OS\ X\ El\
sudo ./createinstallmedia --volume /Volumes/ElCapInstaller --applicationpath /Applications/Install\ OS\ X\ El\ --nointeraction

Reboot computer with command

sudo reboot

And hold option (alt) key while restarting. Select El Capitan installer media and the rest should be self explanatory.

  • tips_and_howtos/el_capitan_install.txt
  • Last modified: 2021/10/24 13:51
  • by