Mount and repair a KVM / Xen virtual guest image file
Once upon a time there was a very old and grumpy server with ancient virtual guests. So it came to be that a major power failure occurred rendering one of the guests useless. Logs told me that it might due to problems with file systems so here is how to mount and fsck them.
Firstly check the first available loopback device
losetup -f
Use the device shown by this command to set up the device
losetup /dev/loop0 <image> kpartx -av /dev/loop0
Observe with fdisk
fdisk -l /dev/loop0
Identify the file system on each partition
file -Ls /dev/mapper/loop0p1
Repair with the tool appropriate to the file system type
fsck.ext4 /dev/mapper/loop0p1